Skip to main content

TACK COAT AND PRIME COAT

PRIME COAT :
A prime coat is mainly responsible for protecting the substrate of a construction project before additional layers are added. In asphalt preparation, they can also act as a binder with secondary and tertiary compounds, creating a better adhesion between the layers. Prime coat asphalt acts as an initial sealer in the asphalt laying process to block the other layers from moisture, dust and debris before additional coating installations.
Important things to remember about installing a prime coat or prime coat asphalt are:
  • It provides temporary waterproofing, but must have additional compound layers in order for the floor, wall, or ceiling coating to perform long-term waterproofing duties.
  • The asphalt prime coat must completely penetrate the base surface in order to be effective.
  • A prime coat must completely cure before an additional layer is incorporated.
  • It is vital to be aware of weather conditions when apply an asphalt prime coat. In the case of wet weather, this step should be postponed to avoid runoff into the water supply.
TACK COAT:

A tack coat is applied after the prime coat, to form an adhesive bond between the tack coat and the next layer of coating. The tack coat prevents slippage and may sometimes function as a more long-term sealer to protect the substrate from moisture and bacteria. For asphalt prime coat systems, the tack coat is one of the most vital parts of the process, as it connects the subsequent layers and forms the base of those layers’ strength.
Important things to remember about installing a tack coat are:
  • It is vital that the prime coat is clean and dry before installing a tack coat.
  • The higher the viscosity of the tack layer, the more shear strength the overall structure will have.
  • Diluted, slow-set emulsions are the most typical style of applying a tack coat.

When choosing a prime coat and tack coat, it is vital to understand the functions of each of these elements, as well as their limitations. With a good prime coat and tack coat, you can prepare your substrate for virtually any type of application, and be confident that the resulting floor, wall, or ceiling is strong and durable for years to come.
Labels:

Comments

Post a Comment

Popular posts from this blog

Degree of Workability and their Values as per IS 456:2000

Degree of Workability and their Values as per IS 456:2000 Degree of Workability Where Used Tests Slump(mm) Compacting Factor Vee Bee Test(seconds) Very Low In Road work and compacted with road rollers * 0.75-0.8 10 to 20 Low Light Reinforced section & Mass Concreting 25-75 0.8-0.85 5 to 10 Medium Hevaily Reinforced Section and Pumpable Concrete 50-100 0.85-0.92 2 to 5 High Piling Works 100-150 >0.92 *** Very High Trime Pipe ** >0.92 *** * Its very low workable to test slump as slump will not collapse means slump will be zero * Its  so workable to test slump as slump will collapse instantly *** Test can not be done as instantly concrete surface will be in plane with glass disk
1 comment
Read more

Preference of Design of Any Reinforced Concrete Structure

1. Safety Any Structure must be safe with appropriate factor of safety for loading that may come on it during its intended life. 2. Serviceability A structure should provide the service fro which it was constructed upto its whole life under service load. 3.Durability A structure should sustain loading for which it was designed and should also provide performance with safety and serviceability. Durability without serviceability and less margin of Factor of safety has no meaning. 4. Economy Design and construction of any structure should be economical without effecting safety, serviceability and durability. 5. Aesthetic Now a days aesthetic is also the criteria that effects design of structure.
Post a Comment
Read more